How to detect the purity value of caustic soda tablets? When using caustic soda, there are usually certain regulations on its content. Due to its strong alkalinity, it is often necessary to determine its dosage when using it. However, the purity of products produced by different manufacturers may vary, wh...
【2020/09/01】
What substances can caustic soda be dissolved with In many cases, various chemicals need to be combined with other chemicals to achieve better results through a series of reactions. However, many chemicals can dissolve different substances into each other. So, when it is reused, what substances can c...
【2020/08/24】
What is the method of heating soda ash by molten salt method? At present, with the gradual development of understanding of commodities, there are many production methods for flake alkali, including alkalization, electrolysis, molten salt, etc., but the entire process of molten salt has already been used. Becaus...
【2020/08/12】
Introduction to alkali dust treatment of flake alkali During the production process of caustic soda,if the concentration of alkali dust is high,workers will be forced to inhale the dust,which not only causes certain harm to their bodies but also corrodes production equipment.Therefore,it is very importa...
What is the heating method for producing soda ash? During the processing,caustic soda is needed to regulate the temperature.Under high temperature standards,the reaction time has been accelerated and many products have been produced in a short period of time.Therefore,in order to obtain more rights,i...
【2020/07/02】
How to use caustic soda to clean the reaction kettle Soda flakes are still quite important at the level of the reaction vessel,because various materials may be involved in the reactor during our daily use.However,sometimes when using the reactor,some oils and fats that are not easy to clean may be adde...
【2020/06/04】
How to use caustic soda to remove oil stains 2. Then pour 50g of water into another plastic bucket and add 3g of additive A and 2g of additive B to this bucket, stirring for 5-10 minutes to dissolve completely. Then pour it into the above-mentioned oil removal tank and pour the remaining 37g of...
【2020/05/12】
The difference between flake alkali and granular alkali There are many substances in our lives that share certain similarities in terms of appearance, performance, and other aspects. Among them, caustic soda and alkali granules are one of them, because their chemical compositions are the same, and many pe...
Shandong Chemical Co., Ltd. mainly produces China caustic soda flake and 99 tablets of alkali, with a wide range of uses, complete varieties, direct sales from manufacturers, and reasonable prices